Demonstration

    Power 220 Volt Equipment from 110 Volt Outlets

Operating Guide - Read the complete instructions and safety information supplied with the Quick 220 Power Tap before use.

1.  Test 110/120 volt outlets with outlet tester supplied with Quick 220 Power Tap to make sure the outlet is wired correctly and does not have a ground fault interrupter in the circuit.

2.  Plug one of the Quick 220 Power Tap's cords into a 110/120 volt outlet.

3.  Plug the other power cord into a different outlet, using an extension cord of appropriate length.

4.  The amber lamp on the front cover will light when connection is made to an outlet on an independent circuit.  If the lamp doesn't light, try different outlets until it does.  (Technically, an "independent" circuit is one that is 180 degrees out of phase with the first.  In practice, Quick 220 systems automatically test for this.  No special knowledge or action is required by the user.)

5.  Plug equipment into the 220/240 volt outlet on Quick 220 system and begin use.

Click Here for Product Information

Home   Voltage Converters   Plug Adapters   Power Strip   Power Cords   Outlet Tester   Warranty   Contact Us   The Company   Site Map

"Quick 220" is a US registered trademark.  Copyright 2003-2007, Diamond H Company, LLC